Moran, Conor ORCID: 0000-0001-6808-5766 and Levingstone, Tanya J.
ORCID: 0000-0002-9751-2314
(2021)
Biofunctional materials for bone and cartilage tissue engineering.
In: Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619, (ed.)
Encyclopedia of Smart Materials.
Elsevier, pp. 185-194.
ISBN 9780128157329
Ekpeni, Leonard E.N., Benyounis, Khaled ORCID: 0000-0001-6599-4892, Stokes, Joseph
ORCID: 0000-0002-6924-1887 and Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619
(2016)
Improving and optimizing protein concentration yield from homogenized baker’s yeast at different ratios of buffer solution.
International Journal of Hydrogen Energy, 41
(37).
pp. 16415-16427.
ISSN 0360-3199
Baroutaji, Ahmad, Gilchrist, Michael, Smyth, David and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757
(2015)
Analysis and optimization of energy absorbers of sandwich tubes with aluminium foam core under lateral loading.
International Journal of Impact Engineering, 82
.
pp. 74-88.
ISSN 0734-743X
Carton, James ORCID: 0000-0002-8498-2544 and Olabi, Abdul-Ghani
ORCID: 0000-0002-7865-1757
(2015)
Representative model and flow characteristics of open pore cellular foam and potential use in proton exchange membrane fuel cells.
International Journal of Hydrogen Energy, 40
(16).
pp. 5726-5738.
ISSN 0360-3199
Ekpeni, Leonard E.N., Benyounis, Khaled ORCID: 0000-0001-6599-4892, Nkem-Ekpeni, Fehintola F., Stokes, Joseph
ORCID: 0000-0002-6924-1887 and Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619
(2015)
Underlying factors to consider in improving energy yield from biomass source through yeast use on high-pressure homogenizer (HPH).
Energy, 81
.
pp. 74-83.
ISSN 0360-5442
Baroutaji, Ahmad, Gilchrist, Michael, Smyth, David and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757
(2015)
Crush analysis and multi-objective optimization design for circular tube under quasi-static lateral loading.
Thin-Walled Structures, 86
.
pp. 121-131.
ISSN 0263-8231
Baroutaji, Ahmad, Carton, James, Stokes, Joseph ORCID: 0000-0002-8498-2544 and Olabi, Abdul-Ghani
ORCID: 0000-0002-7865-1757
(2014)
Design and development of proton exchange membrane fuel cell using open pore cellular foam as flow plate material.
Journal of Energy Challenges and Mechanics, 1
(7).
Baroutaji, Ahmad, Morris, Edmund and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757
(2014)
Quasi-static response and multi-objective crashworthiness optimization of oblong tube under lateral loading.
Thin-Walled Structures, 82
.
pp. 262-277.
ISSN 0263-8231
Ekpeni, Leonard E.N., Benyounis, Khaled ORCID: 0000-0001-6599-4892, Nkem-Ekpeni, Fehintola F., Stokes, Joseph
ORCID: 0000-0002-6924-1887 and Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619
(2014)
Energy diversity through renewable energy source (RES) – a case study of biomass.
In: 6th International Conference on Applied Energy, ICAE2014, 30 May - 2 June 2014, Taipei City, Taiwan.
Ekpeni, Leonard E.N., Nkem-Ekpeni, Fehintola F., Benyounis, Khaled, Aboderheeba, Ayad Khalifa Mohamed, Stokes, Joseph and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757
(2014)
Yeast: a potential biomass substrate for the production of cleaner energy (Biogas).
In: 6th International Conference on Applied Energy, ICAE2014, 30 May - 2 June 2014, Taipei City, Taiwan.
Baroutaji, Ahmad and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757
(2014)
Lateral collapse of short-length sandwich tubes compressed by different indenters and exposed to external constraints.
Materialwissenschaft und Werkstofftechnik, 45
(5).
pp. 371-384.
ISSN 0933-5137
Tamtam, Abdalmonem, Gallagher, Fiona ORCID: 0000-0002-7865-1757, Naher, Sumsun
ORCID: 0000-0003-2047-5807 and Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619
(2013)
The impact of language of instruction on quality of science and engineering education in Libya: qualitative study of faculty members.
European Scientific Journal, 9
(31).
pp. 1-18.
ISSN 1857- 7431
Ekpeni, Leonard E.N. and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757
(2013)
A change in the transportation needs today, a better future for tomorrow – climate change review.
In: Dincer, Ibrahim, Ozgur Colpan, Can and Kadioglu, Fethi, (eds.)
Causes, Impacts and Solutions to Global Warming.
Springer, New York, pp. 933-947.
ISBN 978-1-4614-7588-0
Eltawahni, Hayat, Rossini, Nicola, Dassisti, Michele, Alrashed, K., Aldaham, T., Benyounis, Khaled ORCID: 0000-0001-6599-4892 and Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619
(2013)
Evalaution and optimization of laser cutting parameters for plywood materials.
Optics and Lasers in Engineering, 51
(9).
pp. 1029-1043.
ISSN 0143-8166
Hasanuzzaman, Mohammed ORCID: 0000-0003-1838-0091, Sajjia, Mustafa, Rafferty, Aran and Olabi, Abdul-Ghani
ORCID: 0000-0002-7865-1757
(2013)
Thermal behaviour of zircon/zirconia-added chemically durable borosilicate porous glass.
Thermochimica Acta, 555
.
pp. 81-88.
ISSN 0040-6031
Tamtam, Abdalmonem, Gallagher, Fiona ORCID: 0000-0002-7865-1757, Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619 and Naher, Sumsun
ORCID: 0000-0003-2047-5807
(2012)
A comparative study of the implementation of EMI in Europe, Asia and Africa.
Procedia - Social and Behavioral Sciences, 47
.
pp. 1417-1425.
ISSN 1877-0428
Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619, Dassisti, Michele, Lawlor, Vincent and Russo, Daniela
(2012)
State of the art of biofuels from pure plant oil.
Renewable & Sustainable Energy Reviews, 16
(6).
pp. 4056-4070.
ISSN 1364-0321
Eltawahni, Hayat, Hagino, M., Benyounis, Khaled ORCID: 0000-0001-6599-4892, Inoue, T. and Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619
(2012)
Effect of CO2 laser cutting process parameters on edge quality and operating cost of AISI316L.
Optics & Laser Technology, 44
(4).
pp. 1068-1082.
ISSN 0030-3992
Rossini, Nicola, Dassisti, Michele, Benyounis, Khaled ORCID: 0000-0001-6599-4892 and Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619
(2012)
Methods of measuring residual stresses in components.
Materials & Design, 35
.
pp. 572-588.
ISSN 0261-3069
Carton, James ORCID: 0000-0002-8498-2544, Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619, Lawlor, Vincent, Hochenauer, C. and Zauner, G.
(2012)
Water droplet accumulation and motion in PEM (Proton Exchange Membrane) fuel cell mini-channels.
Energy, 39
(1).
pp. 63-73.
ISSN 0360-5442
Achour, Hussam, Marashly, Abdullah and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619
(2012)
Assessing energy consumption of the transport sector in Aleppo, Syria.
Sustainable Manufacturing and Renewable Energy, 1
(3-4).
pp. 87-102.
ISSN 2153-6821
Ekpeni, Leonard E.N. and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619
(2012)
Energy sustainability – an issue for today.
Journal of Sustainable Development and Environmental Protection, 2
(2).
Tamtam, Abdalmonem, Gallagher, Fiona ORCID: 0000-0002-7865-1757, Naher, Sumsun
ORCID: 0000-0003-2047-5807 and Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619
(2011)
Higher education in Libya, system under stress.
Procedia - Social and Behavioral Sciences, 29
.
pp. 742-751.
ISSN 1877-0428
Eltawahni, Hayat, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Benyounis, Khaled
ORCID: 0000-0001-6599-4892
(2011)
Investigating the CO2 laser cutting parameters of MDF wood composite material.
Optics & Laser Technology, 43
(3).
pp. 648-659.
ISSN 0030-3992
Achour, Hussam, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Carton, James
ORCID: 0000-0002-8498-2544
(2011)
Estimating vehicle emissions from road transport, case study: Dublin City.
Applied Energy, 88
(5).
pp. 1957-1964.
ISSN 0306-2619
Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619, Clarke, Andrew, Khan, Aazir and Prescott, Tim
(2010)
Causes of breakage and disruption in a homogeniser.
Applied Energy, 87
(12).
pp. 3680-3690.
ISSN 0306-2619
Carton, James ORCID: 0000-0002-8498-2544 and Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619
(2010)
Wind/hydrogen hybrid systems: opportunity for Ireland’s wind resource to provide consistent sustainable energy supply.
Energy, 35
(12).
pp. 4536-4544.
ISSN 0360-5442
Rehan, Muhammad, Coleman, J. and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619
(2010)
Delivery actuator for a transcervical sterilization device.
Sensors and Actuators A: Physical, 163
(1).
pp. 343-355.
ISSN 0924-4247
Eltawahni, Hayat, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Benyounis, Khaled
ORCID: 0000-0001-6599-4892
(2010)
Effect of process parameters and optimization of CO2 laser cutting of ultra high performance polyethylene.
Materials & Design, 31
(8).
pp. 4029-4038.
ISSN 0261-3069
Tamtam, Abdalmonem, Gallagher, Fiona ORCID: 0000-0002-7865-1757, Sumsun, Naher
ORCID: 0000-0003-2047-5807 and Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619
(2010)
EMI for engineering education in Arab world and twenty first century challenges.
In: 3rd International Symposium for Engineering Education, 1-2 Jul, 2010, Cork, Ireland.
Carton, James ORCID: 0000-0002-8498-2544 and Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619
(2010)
Design of experiment study of the parameters that affect performance of three flow plate configurations of a proton exchange membrane fuel cell.
Energy, 35
(7).
pp. 2796-2806.
ISSN 0360-5442
Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Grunwald, Artur
(2008)
Computation of magnetic field in an actuator.
Simulation Modelling Practice and Theory, 16
(10).
pp. 1728-1736.
ISSN 1569-190X
Grunwald, Artur and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619
(2008)
Design of magneto-rheological (MR) valve.
Sensors and Actuators A: Physical, 148
(1).
pp. 211-223.
ISSN 0924-4247
Clarke, Andrew and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619
(2008)
Bologna Treaty from the view of students and graduates.
In: ISEE-08 - International Symposium for Engineering Education, 8-10 September 2008, Dublin City University, Ireland.
ISBN 1872327737
Anawa, E. and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619
(2008)
Control of welding residual stress for dissimilar laser welded materials.
Journal of Materials Processing Technology, 204
(1-3).
pp. 22-33.
ISSN 0924-0136
Anawa, E. and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619
(2008)
Optimization of tensile strength of ferritic / austenitic laser welded components.
Optics and Lasers in Engineering, 46
(8).
pp. 571-577.
ISSN 0143-8166
Benyounis, Khaled ORCID: 0000-0001-6599-4892 and Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619
(2008)
Optimization of different welding processes using statistical and numerical approaches – A reference guide.
Advances in Engineering Software, 39
(6).
pp. 483-496.
ISSN 0965-9978
Mazlan, S.A., Ekreem, Nasser B. and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619
(2008)
Apparent stress-strain relationships in experimental equipment where magnetorheological fluids operate under compression mode.
Journal of Physics D: Applied Physics, 41
(9).
ISSN 1361-6463
Grunwald, Artur and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619
(2008)
Design of a magnetostrictive (MS) actuator.
Sensors and Actuators A: Physical, 144
(1).
pp. 161-175.
ISSN 0924-4247
Anawa, E. and Olabi, Abdul-Ghani ORCID: 0000-0002-7865-1757
(2008)
Using Taguchi method to optimize welding pool of dissimilar laser welded components.
Optics & Laser Technology, 40
(2).
pp. 379-388.
ISSN 0030-3992
Benyounis, Khaled ORCID: 0000-0001-6599-4892, Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619 and Hashmi, Saleem
(2008)
Multi-response optimization of CO2 laser welding process of austenitic stainless steel.
Optics & Laser Technology, 40
(1).
pp. 76-87.
ISSN 0030-3992
Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619, Morris, Edmund, Hashmi, Saleem and Gilchrist, Michael
(2008)
Optimised design of nested oblong tube energy absorbers under lateral impact loading.
International Journal of Impact Engineering, 35
(1).
pp. 10-26.
ISSN 0734-743X
Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Grunwald, Artur
(2008)
Design and application of magnetostrictive materials.
Materials & Design, 29
(2).
pp. 469-483.
ISSN 0261-3069
Mazlan, S.A., Ekreem, Nasser B. and Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619
(2007)
The performance of magnetorheological fluid in squeeze mode.
Smart Materials and Structures, 16
(5).
pp. 1678-1682.
ISSN 0964-1726
Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619, Morris, Edmund and Hashmi, Saleem
(2007)
Metallic tube type energy absorbers: a synopsis.
Thin-Walled Structures, 45
(7-8).
pp. 706-726.
ISSN 0263-8231
Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Grunwald, Artur
(2007)
Design and application of magneto-rheological fluid.
Materials & Design, 28
(10).
pp. 2658-2664.
ISSN 0261-3069
Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619
(2007)
Engineering programme structure requirements for Bologna compliance.
In: International Symposium for Engineering Education, ISEE-07, 17-19 September 2007, Dublin City University.
Brabazon, Dermot ORCID: 0000-0003-3214-6381 and Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619, eds.
(2007)
Proceedings of the International Symposium for Engineering Education, ISEE-07.
Dublin City University, Dublin, Ireland.
ISBN 1872-327-64-8
Morris, Edmund, Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619 and Hashmi, Saleem
(2006)
Analysis of nested tube type energy absorbers with different indenters and exterior constraints.
Thin-Walled Structures, 44
(8).
pp. 872-885.
ISSN 0263-8231
Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619, Benyounis, Khaled
ORCID: 0000-0001-6599-4892 and Hashmi, Saleem
(2005)
Effect of laser-welding parameters on the heat input and weld-bead profile.
Journal of Materials Processing Technology, 164-16
.
pp. 978-985.
ISSN 0924-0136
Benyounis, Khaled ORCID: 0000-0001-6599-4892, Olabi, Abdul-Ghani
ORCID: 0000-0001-9209-3619 and Hashmi, Saleem
(2005)
Optimising the laser-welded butt-joints of medium carbon steel using RSM.
Journal of Materials Processing Technology, 164-16
.
pp. 986-989.
ISSN 0924-0136
Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619
(1994)
Residual stresses and heat treatments for metallic welded components.
PhD thesis, Dublin City University.
Olabi, Abdul-Ghani ORCID: 0000-0001-9209-3619
(1990)
The effect of post weld heat treatment and distribution of residual stress in weld repaired high chromium steel (AISI 410) components.
Master of Engineering thesis, Dublin City University.