Doctoral Thesis

Natarajan, Gomathi (2007) Optimisation and fabrication of ultra violet emitting CuC1 thin films by RF sputtering. PhD thesis, Dublin City University.

Gandhiraman, Ram Prasad (2007) PECVD of silicon and titanium based coatings to enhance the biocompatibility of blood contacting biomedical devices. PhD thesis, Dublin City University.

Moiseev, Tamara (2006) Numerical methods and time-dependent physical models for the design and diagnostic of pulsed-dc magnetrons. PhD thesis, Dublin City University.

Lydon Kavanagh, Yvonne (2004) Thin film electroluminescent displays produced using sol-gel methods. PhD thesis, Dublin City University.

Morshed, Muhammad Monjur (2003) Adhesion and cohesion properties of diamond-like-carbon coatings deposited on biomaterials by saddle field neutral fast atom beam source: measurement and modelling. PhD thesis, Dublin City University.

Alam, Mohammad Jahangir (2001) Preparation and characterization of suitable insulating and transparent conducting thin films for thin film electroluminescent devices by sol-gel process. PhD thesis, Dublin City University.

Palazon, Miguel Alberto Monclus (2000) Carbon nitride deposition by magnetron sputtering: structural, mechanical, electrical and optical properties. PhD thesis, Dublin City University.

Daniels, Stephen (1999) PVD process modelling and deposition into sub-micron features. PhD thesis, Dublin City University.

Chowdhury, A. K. M. Shaestagir (1998) Synthesis of carbon nitride thin film by magnetron sputtering technique: its structural characterization and application. PhD thesis, Dublin City University.

Murphy, Michael (1996) Planar sputter magnetron technology. PhD thesis, Dublin City University.

Tang, Wenhui (1994) Electroluminescent displays by sol-gel process. PhD thesis, Dublin City University.

Tan, Liang (1994) Modelling, simulation and multivariable control of plasma etching of silicon and silicon dioxide. PhD thesis, Dublin City University.

Karim, M. D. Ziaul (1993) Growth and characterization of BN thin films deposited by PACVD. PhD thesis, Dublin City University.

Masters Thesis

Cregan, Brian (2004) A method for modelling radio frequency deposition or etch plasma chambers using an equivalent electronic component circuit. Master of Engineering thesis, Dublin City University.

O'Leary, Colm (1999) Design, construction and characterisation of a variable balance magnetron sputtering system. Master of Engineering thesis, Dublin City University.

Carey, Patrick W. (1989) Plasma enhanced chemical vapour deposition of thin carbon films. Master of Engineering thesis, Dublin City University.