Doctoral Thesis

Alrefai, Alla (2021) Investigating the production of multiple bio-products from cassava peel and date seed through an Integrated biorefinery approach. PhD thesis, Dublin City University.

Alrefai, Raid (2021) An evaluation of a proposed approach for overcoming the environmental and economic challenges of anaerobic digestion process through the production of more bio-products. PhD thesis, Dublin City University.

Gunes, Burcu (2019) Investigating various types of pre-treatments of whiskey distillery and brewery wastes for anaerobic digestion. PhD thesis, Dublin City University.

Alharbi, Naif (2019) Novel enhancement of HVOF thermal sprayed nanostructured WC-12Co / inconel-625 coatings for tribocorrosion applications. PhD thesis, Dublin City University.

Aldosari, Marouf (2017) Comparative study of two nozzle assemblies for high velocity oxy fuel (HVOF) thermal spray coating process. PhD thesis, Dublin City University.

Oladoye, Atinuke Modesola (2016) Design and characterisation of metallic bipolar plates for proton exchange membrane fuel cells. PhD thesis, Dublin City University.

Montingelli, Maria (2015) Development and application of a mechanical pretreatment to increase the biogas produced from Irish macroalgal biomass. PhD thesis, Dublin City University.

Ekpeni, Leonard E.N. (2015) Investigation and disruption of baker’s yeast / chlorella vulgaris in high-pressure homogenizer (HPH) to improve cost-effective protein yield. PhD thesis, Dublin City University.

Al-Hamed, Ahmed (2015) Investigation of HVOF thermal sprayed micro/nanostructured WC-12Co mixed with inconel-625 nickel/chrome based coatings for erosion/corrosion applications. PhD thesis, Dublin City University.

Paşcu, Elena Irina (2013) Electrospun three dimensional scaffolds for bone tissue regeneration. PhD thesis, Dublin City University.

Al-Mutairi, Sultan A. (2013) Durability of multi layered plasma and HVOF coatings. PhD thesis, Dublin City University.

Chebbi, Ahmed (2011) Thermal spray of a drug delivery system onto femoral orthopaedic implant. PhD thesis, Dublin City University.

Abu Bakar, Tuty Asma (2010) Tribological Investigation of Nickel Titanium Shape Memory Alloy (NiTi SMA) Coatings. PhD thesis, Dublin City University.

García-Alonso García, Diana (2009) Plasma spray deposition of hydroxyapatite based composites as a step towards bone scaffolds. PhD thesis, Dublin City University.

Kehoe, Sharon (2008) Optimisation of hydroxyapatite (HAp) for orthopaedic application via the chemical precipitation technique. PhD thesis, Dublin City University.

Levingstone, Tanya J. ORCID: 0000-0002-9751-2314 (2008) Optimisation of plasma sprayed hydroxyapatite coatings. PhD thesis, Dublin City University.

Murtaza, Qasim (2006) A critical investigation into the spray-drying of hydroxyapatite powder for thermal spray applications. PhD thesis, Dublin City University.

Al Fadhli, Hussain (2006) Analysis of the effect of bending, fatigue, erosion-corrosion and tensile stresses on HVOF coating of metallic surfaces. PhD thesis, Dublin City University.

Mahbub, Hasan (2005) High velocity oxy-fuel (HVOF) thermal spray deposition of functionally graded coatings. PhD thesis, Dublin City University.

Masters Thesis

Manning, Niall (2010) Design and Validation of a Force Measurement System for the Analysis of Airfoil Lift and Drag Characteristics. Master of Engineering thesis, Dublin City University.

Paşcu, Elena Irina (2009) Bioactive and biodegradable scaffolds for hard tissue engineering. Master of Engineering thesis, Dublin City University.

Hasan, Shahriar (2009) Design of experiment analysis of high velocity oxy-fuel coating of hydroxyapatite. Master of Engineering thesis, Dublin City University.

Al Mamun, Md. Kabir (2007) Design and development of a powder mixing device used in the deposition of high velocity oxy-fuel (HVOF) thermal spray functionally graded coatings; Kabir Al Mamun. Master of Engineering thesis, Dublin City University.

O'Reilly, Eugene (2006) Analysis of boundary layers through computational fluid dynamics and experimental analysis. Master of Engineering thesis, Dublin City University.

Akter, Taslima (2006) Manufacturing of biocomposite shell mimetic via the powder compaction method. Master of Engineering thesis, Dublin City University.